AUTOMATIC PICK FILL AND SEAL MACHINE (MODEL: UFLEX-PFS)

Uflex Pick Fill and Seal Machine is a fully automatic, intermittent motion, 10 station rotary indexing filling and sealing machine to pack powder, granules, liquids and paste in preformed pouches like center seal pouch, three side seal pouch, stand-up pouch and zipper pouch etc. made-up of heat sealable laminated film.

This machine can be provided with the various dozing system for the products like powder, granule, liquid and paste. The machine is a state-of-the-art mechanical robotic system, which has a close loop smart control system, which ensures the operation:

NO PICK - NO FILL
&
NO FILL - NO SEAL

The above close loop system ensures practically negligible wastage of packing material and the product.

The machine is an operator friendly machine and has a very simple change over operation sequence from one pouch size to another. The machine has an automatic in-feed conveyor system for preformed pouches and an out-feed dispensing ramp for the filled and sealed out-going pouches.

PICK FILL & SEAL MACHINE

1. Product to be packed	- Liquid : Oil, MineralWater, Ketchup,Syrup, Etc. - Powder : Milk Powder, Heena, Various Flour Etc. - Granules : Tea, Peanuts,Cashew Nuts, Rice, Pulses Etc. - Others : Light Weight Hardware, Pickle Etc.
2. Qty. to be packed	- 5 gms to 1000 gms. (Depending upon product to be packed)
3. Machine	- Automatic Pick Fill & Seal Machine ( MODEL : FLEX - PFS )
4. Control	- PLC ( Programmable Logic Control )
5. Temperature Controller	- PID type
6. Pouch type	- Preformed
7. Pouch Size	Min.(mm) Max.(mm) Width 90 190 / 220 * Length 100 280 / 320 * * ( with additional set of pouch feeding conveyor )
8. Filling system	- Cup Filler, Auger Filler, Gravity Matrix, Load Cell Weigher
9. Speed	- 40-45 Pouches/min. (Depending upon product to be packed)
10. Accuracy	+ 2 % Output & Accuracy depends on following: Characteristics of product to be packed Quantity of product to be packed Consistency in Bulk density / Viscosity of the product Consistent level of product in machine hopper Maintaining RH in packing room if the product is hygroscope in nature.
11. Power Consumption	- 5 KW
12. Power supply	- 415 V/A.C/ Three Phase
13. Utility	- Compressor : 30 CFM, 10 Bar
14. Feature	- Easy Change over to Various Pouch Size - Sensor to Avoid Product & Pouch Wastage
15. Optional Feature	- Coding - Dust Extraction System (at an extra cost )
16. Dimensions	L=3600 mm., W= 2800 mm., H = 1900 mm.
17. Weight	1210 Kg. ( Approx.)